{"product_id":"scania-next-gen-2016-positionsleuchte-fur-led-fernlicht","title":"Position light for LED high beam - Suitable for Scania Next-Gen 2016+","description":"\u003cp\u003e\u003cstrong\u003ePosition light for LED high beam. Suitable for Scania Next-Gen 2016+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-performance LED spotlights for additional position light, mounted within the light bars under the windshield. Available in several colours, with or without a flashing light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid colour version, (Amber\/White\/Warm white)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach transmitter has a 3-meter-long cable that can be connected to the standard navigation light. There is a positive and a negative wire.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual-colour version\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach panel has a 3-meter-long cable. There is one negative wire and two positive wires. Both colours should never be switched on at the same time, so you must use a toggle switch to change between the colours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual-colour + flash version\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe standard strobe light colour is yellow, but it can be changed to other colours like blue or white for special vehicles.\u003c\/p\u003e\n\u003cp\u003eThe transmitter has a 6-meter cable with M8 connectors that connects to the included controller. The controller manages the two colours and automatically switches them off when you activate the strobe light. The controller itself has a 3-meter cable with four wires.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinus - Green cable\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003ePlus for white position light - white cable\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003ePlus for yellow position light - Yellow cable\u003c\/li\u003e\n\u003cli\u003ePlus for strobe light - brown cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eIt is necessary to cut the cables with M8 connectors during assembly. Therefore, ensure that you waterproof the assembly and connect the wires using the correct colours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemoval of the heat sink\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemove the two screws securing the heatsink. Remove the clips along the edge. The heatsink is glued to the lamp. Carefully cut along the edge of the heatsink (blue line). It is very important that the knife blade is not too long, otherwise you risk cutting the internal wires.\u003c\/p\u003e\n\u003cp\u003eSeparate the lamp and the heat sink using a flat screwdriver or a wedge.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0830\/3978\/1196\/files\/240912-1_3.jpg?v=1729896736\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting holes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the included thin plastic drilling template (colour varies) to drill the 3 x 3 mm mounting holes. The template fits over the lamp, with a corresponding recess (green lines).\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0830\/3978\/1196\/files\/240912-2_2.jpg?v=1729896736\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation of the spotlight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBe very careful when handling these LED emitters, as the LEDs are very fragile.\u003c\/p\u003e\n\u003cp\u003eThe emitter is inserted through a hole in the lamp. If you have difficulty inserting it, you can cut off the plastic part marked with red lines.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0830\/3978\/1196\/files\/240912-3_2.jpg?v=1729896736\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe spotlight is attached to the back of the lamp using the screws provided.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0830\/3978\/1196\/files\/240912-4_1.jpg?v=1729896736\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0830\/3978\/1196\/files\/240912-6_1.jpg?v=1729896735\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ecable entry\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAvoid pulling on the wires of the spotlight.\u003c\/p\u003e\n\u003cp\u003eWe recommend drilling a hole in the back of the lamp to allow the cable to be pulled through. There is a square recess where you can drill a suitable hole. Once the cable is in place, you can fill this recess with adhesive.\u003c\/p\u003e\n\u003cp\u003eFor cables with plugs, you need to cut the cable at a suitable point and reconnect the wires. Make sure you connect the correct colours together.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0830\/3978\/1196\/files\/240912-7_2.jpg?v=1729896735\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting the heat sink\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNew adhesive must be applied along the edge of the lamp, in the same places as the original adhesive. The heat sink is slid downwards and screwed into place. If possible, also install the mounting brackets.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Amber","offer_id":48935830257996,"sku":"","price":216.95,"currency_code":"EUR","in_stock":true},{"title":"Ice White","offer_id":48935830290764,"sku":"","price":216.95,"currency_code":"EUR","in_stock":true},{"title":"Warm white","offer_id":48935830323532,"sku":"","price":216.95,"currency_code":"EUR","in_stock":true},{"title":"Two-tone \u0026 flashing light","offer_id":48935830356300,"sku":"","price":250.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/3978\/1196\/files\/1_500x_ee546654-a18b-403b-b744-080acf302080.webp?v=1729895686","url":"https:\/\/truck-interior-lights.ch\/en-eu\/products\/scania-next-gen-2016-positionsleuchte-fur-led-fernlicht","provider":"Truck Interior Lights","version":"1.0","type":"link"}